How to get rid of those pesky black dots on your fiber optic camera

The camera is a thing of beauty.

But what happens when you want to keep the picture of your wedding in focus?

A lens with a black dot on the lens element has a reputation for being a prime target for camera-snatchers.

In recent years, some of the worst offenders have been those using optical elements made by companies like LensCrafters and the Optics Corporation of America.

While we’re still not sure what causes these black dots, they are known to have a number of harmful effects.

Here’s how to remove them from your lens.

How to remove a lens black dot What you need: A sharp, white mirror.

LensCrafter sells a kit with a mirror that will do the trick.

You’ll need the same mirror that you use to attach your lenses, but with a different mirror.

There are several options, including a plastic or metal one.

How many you need depends on your needs, and how much you’re willing to spend.

You might be able to remove it using the mirror provided, or you might need a more expensive mirror that has a built-in coating.

It depends on how big of a deal the black dots are.

But the larger the black dot, the more likely it is to be removed.

There’s no rule on how much to remove.

For instance, if the black spot is only 1/3 the size of the aperture ring, you may not be able get enough resolution.

You could also be able a small amount, which will get rid the black circle entirely.

The best thing you can do is wait until the black hole is completely gone.

Then you can remove it with a lens cleaner or a UV laser.

How often do black dots show up?

It depends.

For a typical camera lens, black dots typically show up every few hundredth of a millimetre or so, or once every 100,000 shots.

If you shoot a lot of photos, you’ll probably have to wait longer.

If there are lots of dots, it’s probably because your lens is getting older and has a lot more dust particles.

The bigger the dots, the longer they will last.

So for example, if you take a photo of a family wedding in your backyard, you’re going to want to take lots of photos of the wedding, and you’ll want to capture lots of pictures of the flowers.

You may also have to take photos of your baby sitting next to you at the altar or your kids dancing around the pool.

In the photo above, you can see how the flowers were in the foreground and the background were the shadows of the family members.

It’s likely that the lens has a black-dot coating on the back.

In some cases, you will also need to remove the lens hood and hood ring.

The lens hood is a thin strip of metal or plastic that covers the lens and lens cap.

You can remove the hood by removing the cap, but you’ll need to get a sharp lens to remove all of the black-spots.

The hood also comes with a small hole that you can insert your fingers into.

How much is enough?

A black-spot-free lens is typically less than $150, so a good lens for a typical wedding or event can be worth $1,500.

However, for more serious situations, you might want to get one with a coat of clear coat.

If the lens you want is going to be used for longer than 10 years, it may be worth getting a higher-quality lens that has less black-tinting.

How do I remove black dots from my lenses?

LensCraver sells a lens that will get you through this step.

You need to take a sharp white mirror and use it to align your mirror with the front of the lens, as well as to remove any black-marked edges on the rear of the mirror.

You will need a mirror of the same diameter as your lens and the same shape, so you might have to get some kind of mirror adapter to get the job done.

The mirror should be as small as possible, as you’ll be removing the lens with the most light on it.

The smaller the mirror, the less likely you are to have black dots in the lens.

What you will need: LensCrauter sells a mirror for this job, but the mirror that we’re using has a little bit of a black hole at the bottom, so it won’t remove black-screens or black dots.

There is a smaller, black-hole-free mirror, but it is slightly larger than the mirror we’re looking at.

What the mirror should look like: LensCrafter’s mirror.

How long will it take?

It’s best to get it done as soon as possible after you take your photo.

If it takes you more than 10 minutes, you need to find a different camera to take the photo, and find a way to remove those black