The answer is actually quite simple: build a fiberoptic trailer.
Here’s how to do it.1.
Get the right dimensionsFor most people, a fiber optic trailer is a pretty typical size, usually around 5 feet wide by 10 feet tall.
You could probably do it with a few inches of fiberglass, but for most people the trailer would be more like a 2-by-4-foot square, which is what the trailer shown in the video above would be.
If you’re going to build a 5-foot-wide trailer, you should probably get the right dimension for your structure.2.
Find the right sizeThe right dimensions for a fiber optical trailer are very important.
If the dimensions are too long, it can become a hassle to build the trailer, especially if it’s a new structure.
The dimensions that will work for a trailer are: length: 5 feet tall by 10 ft wide2.
width: 4 feet3.
height: 3 feet4.
width plus height: 4.5 feetFor most trailer projects, you need to build in a very wide space.
A trailer that’s 5 feet by 10 foot is probably not going to work well in a narrow space, because the width of the space will be too narrow.
To work with a 5 foot wide trailer, the dimensions you need are: width: 5.5 foot (including floor)Length: 5 foot (excluding floor)Width plus height (including ground): 6 foot (plus wall)Width minus height: 5 inch (plus floor)Height plus wall: 3.5 inch (minus floor)You’ll also need to know how much fiberglass you need.
If your trailer is built out of fiberglas, you’ll need to use about 2/3 of the total fiberglass in your trailer.4.
Measure your trailer lengthUsing a tape measure or ruler is the best way to determine the length of the trailer.
A tape measure measures 1 foot by 3 feet, or about 8 inches.
You’ll need this to determine your length of fiber optic cable, so it’s important to know exactly how much cable you need for the length you’re building.5.
Measure the width plus the height of the fiberglassYou’ll want to know the width and height of your fiberglass to know what length you need, but you also need the width in inches.
Your trailer needs to be 5 feet in length, and the width will be 8 inches wide.
You want to measure your width plus your height in inches, so you need your width to be 1 foot.
If it’s just 2 inches wide, then you need a 2 inch wide width, and a 2.5-inch wide height.
The width plus length is then multiplied by the length to get the total length, so your total length should be 3 feet.6.
Measure length and width of your trailer using a tape measuring tapeThe tape measuring method is very useful, and if you have a measuring tape handy, you can easily measure your trailer and make sure the correct lengths of fiber glass are being used.7.
Measure lengths of the cable you’re usingIn this example, we’ve got a 5.6-foot length of cable from a fiberglass conduit.
If we used a 2 x 2 cable, we’d need to measure the width x length x width to get a total length of 7 feet, so the total width of cable is 9 feet, the total height is 8 feet.8.
Measure cable lengthsUsing the measuring tape method is easy, but the tricky part is to know where you need the lengths to go.
The lengths are measured using a long-end extension cord, which runs the length from the end of the extension cord through the fiber optic conduit, which has a very narrow length.
The length of this cable, in inches long, is 4 feet, but that cable is 8 inches long.
The total length is 3.8 feet, and that is where the problem comes in.
If a cable is 6 inches long and the total cable length is 8.5 inches long when the length is measured, then the total is 3 inches.
If that cable length goes 5 inches, the length can go by 5.8 inches.
So you need some extra cable to make sure your cable length stays at the correct length.
To make sure you don’t go over your length, you will want to mark where you will add the extra length of your cable.
You can mark the cable length on a 1-by 4-foot board and then measure that length on the board.
If there’s an extension cord attached to your cable, you might want to use the measuring method to measure cable lengths, but this is not necessary if you use a long end extension cord.
You don’t have to measure all the cable lengths on your cable end extension.9.
Measure total length with a tape measurement tape is a bit of a pain, but it can be done